Blog
2 mins read

PCI Express On the 96Boards Poplar Enterprise Edition Board

Friday, February 2, 2018

It Works! I am very excited to let our readers know that finally, thanks to some developments in the past month, we now have a fully functioning PCIe slot on...

Sahaj Sarup
Blog
2 mins read

UCSD ECE 191 - 4 Week Summary

Thursday, February 1, 2018

Team I Members RunXuan Tay Josh Minch Seungku Jung Steve Nguyen Week 1 We were just introduced to our project in our ECE 191 class; we found out that we...

ECE 191 Team I Winter 2018
Blog
11 mins read

Coursera Revamp! UCSD's IoT Specialization featuring 96Boards

Thursday, February 1, 2018

Coursera IoT Re-vamp! Featuring UCSD, Qualcomm and 96Boards! Introduction In 2015 the University of California, San Diego - Qualcomm Institute (CALIT2) teamed up with Qualcomm to create a massive open...

Robert Wolff
Blog
3 mins read

Part 4 - Patient Monitoring System using 96Boards

Wednesday, January 31, 2018

Introduction Hello and Welcome to the final Part 4 of Patient Monitoring System using 96Boards blog series. This blog describes the final implementation of Patient Monitoring System project in realtime....

Manivannan Sadhasivam
Blog
2 mins read

Our path to libmraa on 96Boards – Part 6

Monday, January 29, 2018

Introduction Welcome to Part - 6 of Our path to libmraa with 96Boards series. In this part I will provide a quick summary of the examples cleanup done in libmraa....

Manivannan Sadhasivam
Blog
12 mins read

Part 3 - Patient Monitoring System using 96Boards

Friday, January 19, 2018

Introduction Hello and Welcome to Part 3 of Patient Monitoring System using 96Boards blog series. In this blog, we are going to see how to visualize the data coming from...

Manivannan Sadhasivam
Blog
1 min read

Carbon Rover

Friday, January 19, 2018

Carbon Rover In one of my previous blogs titled: Zephyr RTOS and HC-SR04 Ultrasonic Sensor, I talked about working with ultrasonic sensors using Zephyr RTOS. That was just one ultrasonic...

Sahaj Sarup
Blog
5 mins read

Part 2 - Patient Monitoring System using 96Boards

Friday, January 12, 2018

Introduction Hello and Welcome to Part 2 of Patient Monitoring System using 96Boards blog series. In this blog, we are going to see the data exchange between BLE mesh network...

Manivannan Sadhasivam
Blog
1 min read

Gigabit NAS using Poplar

Wednesday, January 10, 2018

Gigabit Network Attached Storage using Poplar In the last episode of OpenHours, Episode #85, I demonstrated my NAS setup using the Poplar Enterprise Edition Board. Poplar, at the moment, is...

Sahaj Sarup