Blog
5 mins read

Out with Arduino, In with i2c and PCA9685 | OpenCV on RB3 Pt. 7 | Qualcomm RB3 Robotic Arm Project

Wednesday, October 16, 2019

Introduction As per my last blog, due to pending enablement of i2c driver in the official debian image we were still using Arduino over USB-UART to control the actual servos....

Sahaj Sarup
Blog
2 mins read

The Ultimate Quick, Quick Start Guide for DragonBoard410c

Saturday, September 21, 2019

What is this guide ? This guide’s purpose is to serve as an index to all the documentation related to getting started with the Qualcomm DragonBoard 410c already available on...

Sahaj Sarup
Blog
4 mins read

Getting Started Resource - Shiratech FFPGA Mezzanine

Saturday, September 14, 2019

The Shiratech FPGA Mezzanine The Shiratech FPGA Mezzanine for 96Boards adds configurability to your embedded environment using the Intel MAX-10 FPGA. With the CPU and FPGA combo, you can connect...

Sahaj Sarup
Blog
13 mins read

It's ALIVE | OpenCV on RB3 Pt. 6 | Qualcomm RB3 Robotic Arm Project

Monday, September 9, 2019

Introduction It listens, It sees, It MOVES, IT’s ALIVE!!! All the code in this blog is available at : https://github.com/ric96/RB3-RoboticArm And once the project is finalized will be pushed to...

Sahaj Sarup
Blog
8 mins read

Speech Recognition and Combining Voice with Vision | OpenCV on RB3 Pt. 5 | Qualcomm RB3 Robotic Arm Project

Thursday, August 15, 2019

Introduction In this blog we’ll take a look at the Voice Recognition Code and see how we can combine it with the Vision aspect of this project. All the code...

Sahaj Sarup
Blog
2 mins read

96Boards Upstreaming Roadmap

Wednesday, July 31, 2019

Introduction Hello and Welcome to the blog on “96Boards Upstreaming Roadmap”. This blog will summarise the 96Boards upstreaming roadmap for the second half of 2019. Roadmap for Second half of...

Manivannan Sadhasivam
Blog
1 min read

Setup RB3 for the Robotic Arm Project | OpenCV on RB3 Pt. 0 | Qualcomm RB3 Robotic Arm Project

Monday, July 29, 2019

Setup Let’s take a few steps back and learn how to setup our RB3 for the Robotic Arm Project. Back in my first blog, I mentioned that the Debian images...

Sahaj Sarup
Blog
4 mins read

Poplar NAS | A Daily Driver NAS Setup

Monday, July 22, 2019

Poplar NAS Backstory My personal NAS project started back in the day with an overclocked Raspberry Pi 1, a 500GB external HDD and a 100/10 LAN setup. Back then it...

Sahaj Sarup
Blog
4 mins read

96Boards Upstreaming Summary

Monday, July 15, 2019

Introduction Hello and Welcome to the blog on “96Boards Upstreaming Summary”. This blog will summarise the 96Boards upstreaming efforts for the first half of 2019 in Linux kernel, U-Boot, Trusted...

Manivannan Sadhasivam