Blog
4 mins read

Reference Software Platform 16.06 Release!


We are pleased to announce the 16.06 release for the Reference Software Platform project! This is the fourth release, and like its predecessors, it has seen quite a few changes and improvements...

rsalveti
Blog
2 mins read

96Boards OpenHours Session 7 Recap


96Boards OpenHours session seven the topic was “How to Cross Compile files on X86 Linux System for 96Boards, libsoc & mraa libraries.” To watch this weeks’ session go to: https://www.youtube.com/watch?v=eMPG24OgQ-o&feature=em-subs_digest...

jennifer.castelino
Blog
12 mins read

How to Cross Compile files on X86 Linux System for 96Boards, libsoc & mraa libraries


Introduction It’s been an interesting journey getting cross compiling working. While I’ve done a fair amount of embedded work in C over the years I did a great deal of...

davidm
Blog
4 mins read

96Boards OpenHours Session 6 Recap


96Boards OpenHours session six the topic was “Installing Docker on aarch64 with the Reference Platform Build on a 96Boards CE-edition. To watch this weeks’ session go to: https://www.youtube.com/watch?v=lvv7CbXOHtw Below is...

jennifer.castelino
Blog
3 mins read

Installing Docker on aarch64 with the Reference Platform Build on a 96Boards CE-edition


About Docker Docker is “an open source project to pack, ship and run any application as a lightweight container.” It’s a very interesting tool from the Enterprise space, and docker.com...

fletcherb_linaro
Blog
2 mins read

96Boards OpenHours Session 5 Recap


Our fifth 96Boards OpenHours session the team discussed in more detail enabling the GPIO libraries on 96Boards.  To watch this weeks’ session go to: https://www.youtube.com/watch?v=fbTo3BwURg8&feature=em-subs_digest Below is an overview of what...

jennifer.castelino
Blog
12 mins read

Programing I2C devices with libmraa and libupm


Thank you everyone who participated in this week’s Open Hours. Today I had the opportunity to speak about the I2C (Inter-integrated Circtui) and GPIO (General Purpose input/output) interfaces, taking what...

ldts-atsuka
Blog
12 mins read

96Boards Out of box experience guide - part 5


Congratulations! Four whole blogs down and ready for the fifth. In this last month we have been through a lot of material, I think it deserves a short recap: Part...

Robert Wolff
Blog
7 mins read

96Boards OpenHours Session 4 Recap


In our fourth installment of the 96Boards OpenHours session the team discussed the low-speed expansion header and it’s many GPIO interfaces. Robert also highlighted some great examples and resources to help...

jennifer.castelino