Blog
5 mins read

DragonBoard 410c and demos

Monday, November 9, 2015

Last time I published, I talked about 96Boards in general and my feelings about the initiative. This time I’m going to talk about the DragonBoard 410c which is built by...

davidm
Blog
2 mins read

Reference Software Platform 15.10 Alpha Release!

Saturday, November 7, 2015

It took a bit longer than originally planned, but we’re finally able to announce the first Reference Software Platform release (alpha). The Reference Software Platform Lead Project is part of the...

rsalveti
Blog
6 mins read

Xenomai on the 96Boards

Friday, November 6, 2015

Xenomai is a well established open source Linux project that has been providing GNU/Linux with a number of RTOS emulators for over a decade on almost every processor family; VxWorks,...

ldts
Blog
1 min read

So you have an idea for a PCB?

Tuesday, November 3, 2015

From Idea to Production Designing your own Mezzanine board is exciting process, plus it’s a much neater solution than projects with millions of jumper cables! In the following series of...

sophie-haynes
Blog
1 min read

So you have an idea for a PCB? - Development (Netlist)

Tuesday, November 3, 2015

If you are unsure as to what a netlist is; put simply it’s a condensed version of your schematic that can imported into your pcb. Navigation DRC Netlist Generator DRC...

sophie-haynes
Blog
7 mins read

So you have an idea for a PCB? - Development (Schematic)

Tuesday, November 3, 2015

Congratulations! You’re starting the second phase of the project. Now you will be using actual tools from this point onward. There are several tools you can use for developing your...

sophie-haynes
Blog
1 min read

So you have an idea for a PCB? - Specification

Tuesday, November 3, 2015

Welcome to the first step of your journey! So you have a kick-ass idea for a Mezzanine project? Or perhaps you have been given specific guidelines on what you are...

sophie-haynes
Blog
13 mins read

So you have an idea for a PCB? - Development (PCB)

Tuesday, November 3, 2015

PCB stands for printed circuit board and in my opinion, is probably the most fun part of the process. This is where your idea finally starts to become a visible...

sophie-haynes
Blog
6 mins read

So you have an idea for a PCB? - Development (Footprints)

Tuesday, November 3, 2015

Sometimes you won’t always have access to the correct footprint, or it may not even exist. This does not mean you have to change components though; instead you simply get...

sophie-haynes