Blog
2 mins read

96Boards OpenHours Session 5 Recap

Saturday, June 11, 2016

Our fifth 96Boards OpenHours session the team discussed in more detail enabling the GPIO libraries on 96Boards.  To watch this weeks’ session go to: https://www.youtube.com/watch?v=fbTo3BwURg8&feature=em-subs_digest Below is an overview of what...

jennifer.castelino
Blog
12 mins read

Programing I2C devices with libmraa and libupm

Friday, June 10, 2016

Thank you everyone who participated in this week’s Open Hours. Today I had the opportunity to speak about the I2C (Inter-integrated Circtui) and GPIO (General Purpose input/output) interfaces, taking what...

ldts-atsuka
Blog
12 mins read

96Boards Out of box experience guide - part 5

Wednesday, June 8, 2016

Congratulations! Four whole blogs down and ready for the fifth. In this last month we have been through a lot of material, I think it deserves a short recap: Part...

Robert Wolff
Blog
7 mins read

96Boards OpenHours Session 4 Recap

Sunday, June 5, 2016

In our fourth installment of the 96Boards OpenHours session the team discussed the low-speed expansion header and it’s many GPIO interfaces. Robert also highlighted some great examples and resources to help...

jennifer.castelino
Blog
10 mins read

96Boards Out of box experience guide - part 4

Wednesday, June 1, 2016

Hello again, and welcome to part 4 of the out of box experience guide. This week we will be looking at the low speed expansion header on your 96Boards. The...

Robert Wolff
Blog
2 mins read

96Boards OpenHours Wrap-Up Week 3

Friday, May 27, 2016

Yesterday was the third installment of the 96Boards OpenHours sessions.  This week the topic was 96Boards compatible enhancements, design tools, and add-ons. This includes the available Mezzanine product line with sensors...

jennifer.castelino
Blog
8 mins read

96Boards Out of box experience guide - part 3

Tuesday, May 24, 2016

You’ve made it to part three of the out of box experience! Previously we spoke about three different Consumer Edition boards (HiKey, DragonBoard 410c, and Bubblegum-96) and what makes them...

Robert Wolff
Blog
6 mins read

96Boards Out of box experience guide - part 2

Tuesday, May 17, 2016

In the last issue of this blog series, we took a quick look at the 96Boards unboxing process. I talked about gathering all the out of box necessities, setting up...

Robert Wolff
Blog
2 mins read

Fritzing part for 96boards CE

Tuesday, May 17, 2016

As I was playing with the DS18B20 digital temperature sensor on the weekend, I noticed that there was no Fritzing part for any of the 96boards we have (e.g. HiKey, Dragonboard410c,...

rsalveti