Mozilla IoT on 96Boards | Part 1

Wednesday, September 5, 2018

Introduction This blog and probably the following blogs in this series will just be a quick look at what I am currently working on and my experience. We do plan...

Programming The SeeedStudio Sensors Mezzanine using a PC

Tuesday, August 28, 2018

SeeedStudio Sensors Mezzanine The 96Boards Sensors Mezzanine adapter makes it simple and easy to connect sensors and devices to any 96Boards-compatible base board. With it you can connect your favorite...

Devconf India - 2018

Friday, August 17, 2018

Devconf India 2018 During the first week of August (4,5) Linaro India team took part in the Devconf India 2018 conference held at Christ University, Bangalore. This blog summarises the...

Audio Visualizer | Playing with the DragonBoard410c Analog Header

Wednesday, August 8, 2018

Introduction The idea for this project came because I wanted to create a similarly styled Audio Visualizer for the Vinyl setup at my home. There were two simple requirements: Stereo...

OpenHours Episode 109 - Shiratech, FPGA Mezzanine

Thursday, August 2, 2018

Introduction This week, we met with Ramon Horkany from Shiratech Solutions. Shiratech is a new 96Boards partner who has hit the ground running with two amazing 96Boards mezzanine boards, which...

OpenHours Episode 108 - Contest Announcements!

Sunday, July 29, 2018

Introduction This week, we had three special contest announcements! In the first half of the broadcast, we spoke about several contests which will take place in many places around the...

Playing with the Sensors | ShiraTech LTE and Sensor Mezzanine

Friday, July 27, 2018

Introduction In one of my older blog posts, I wrote about the LTE side of things on this Mezzanine. However, in this one, we are going to discuss how to...

HiKey IceCream | Arm64 Distributive Compilation Cluster

Monday, July 23, 2018

“I have a drawer full of Arm SBCs…” - The statement that resulted in this blog. NOTE: If you are looking for benchmarks, go read a good recipe book. Introduction...

OpenHours Episode 107 - Hello Chava

Thursday, July 19, 2018

Introduction This week, we will spoke with Meral and Isaac from Hello Chava, two of the hardest working people I follow on Instagram. On an almost daily basis, you will...

OpenHours Episode 106 - Disruptityourself

Thursday, July 12, 2018

Introduction This week, we met with Andrew from Distrupt it Yourself, who uses 3D printers and other disruptive tools to encourage others to make! Andrew was seriously well versed and...