Using Eclipse on X86 Linux to cross compile C & C++ for ARM Linux

Wednesday, July 13, 2016

In my last blog I showed how to install and use ARM command line cross compilation tools. In this blog I’ll show you how to install Eclipse for C &...

96Boards OpenHours Session 9 Recap

Tuesday, July 12, 2016

96Boards OpenHours session nine the topic was “HiKey and AOSP”.  To watch this weeks’ session go to: https://www.youtube.com/watch?v=kAE38zjfHPw  Below is an overview of what was discussed including the time in the video...

Reference Software Platform 16.06 Release!

Wednesday, July 6, 2016

We are pleased to announce the 16.06 release for the Reference Software Platform project! This is the fourth release, and like its predecessors, it has seen quite a few changes and improvements...

96Boards OpenHours Session 7 Recap

Tuesday, June 28, 2016

96Boards OpenHours session seven the topic was “How to Cross Compile files on X86 Linux System for 96Boards, libsoc & mraa libraries.” To watch this weeks’ session go to: https://www.youtube.com/watch?v=eMPG24OgQ-o&feature=em-subs_digest...

How to Cross Compile files on X86 Linux System for 96Boards, libsoc & mraa libraries

Thursday, June 23, 2016

Introduction It’s been an interesting journey getting cross compiling working. While I’ve done a fair amount of embedded work in C over the years I did a great deal of...

96Boards OpenHours Session 6 Recap

Monday, June 20, 2016

96Boards OpenHours session six the topic was “Installing Docker on aarch64 with the Reference Platform Build on a 96Boards CE-edition. To watch this weeks’ session go to: https://www.youtube.com/watch?v=lvv7CbXOHtw Below is...

Installing Docker on aarch64 with the Reference Platform Build on a 96Boards CE-edition

Thursday, June 16, 2016

About Docker Docker is “an open source project to pack, ship and run any application as a lightweight container.” It’s a very interesting tool from the Enterprise space, and docker.com...

96Boards OpenHours Session 5 Recap

Saturday, June 11, 2016

Our fifth 96Boards OpenHours session the team discussed in more detail enabling the GPIO libraries on 96Boards.  To watch this weeks’ session go to: https://www.youtube.com/watch?v=fbTo3BwURg8&feature=em-subs_digest Below is an overview of what...

Programing I2C devices with libmraa and libupm

Friday, June 10, 2016

Thank you everyone who participated in this week’s Open Hours. Today I had the opportunity to speak about the I2C (Inter-integrated Circtui) and GPIO (General Purpose input/output) interfaces, taking what...

96Boards Out of box experience guide - part 5

Wednesday, June 8, 2016

Congratulations! Four whole blogs down and ready for the fifth. In this last month we have been through a lot of material, I think it deserves a short recap: Part...

Follow Us

Recent Blogs