Blog
8 mins read

Devconf India - 2018

Friday, August 17, 2018

Devconf India 2018 During the first week of August (4,5) Linaro India team took part in the Devconf India 2018 conference held at Christ University, Bangalore. This blog summarises the...

Manivannan Sadhasivam
Blog
2 mins read

Audio Visualizer | Playing with the DragonBoard410c Analog Header

Wednesday, August 8, 2018

Introduction The idea for this project came because I wanted to create a similarly styled Audio Visualizer for the Vinyl setup at my home. There were two simple requirements: Stereo...

Sahaj Sarup
Blog
3 mins read

OpenHours Episode 109 - Shiratech, FPGA Mezzanine

Thursday, August 2, 2018

Introduction This week, we met with Ramon Horkany from Shiratech Solutions. Shiratech is a new 96Boards partner who has hit the ground running with two amazing 96Boards mezzanine boards, which...

Robert Wolff
Blog
6 mins read

OpenHours Episode 108 - Contest Announcements!

Sunday, July 29, 2018

Introduction This week, we had three special contest announcements! In the first half of the broadcast, we spoke about several contests which will take place in many places around the...

Robert Wolff
Blog
4 mins read

Playing with the Sensors | ShiraTech LTE and Sensor Mezzanine

Friday, July 27, 2018

Introduction In one of my older blog posts, I wrote about the LTE side of things on this Mezzanine. However, in this one, we are going to discuss how to...

Sahaj Sarup
Blog
2 mins read

HiKey IceCream | Arm64 Distributive Compilation Cluster

Monday, July 23, 2018

“I have a drawer full of Arm SBCs…” - The statement that resulted in this blog. NOTE: If you are looking for benchmarks, go read a good recipe book. Introduction...

Sahaj Sarup
Blog
2 mins read

OpenHours Episode 107 - Hello Chava

Thursday, July 19, 2018

Introduction This week, we will spoke with Meral and Isaac from Hello Chava, two of the hardest working people I follow on Instagram. On an almost daily basis, you will...

Robert Wolff
Blog
5 mins read

OpenHours Episode 106 - Disruptityourself

Thursday, July 12, 2018

Introduction This week, we met with Andrew from Distrupt it Yourself, who uses 3D printers and other disruptive tools to encourage others to make! Andrew was seriously well versed and...

Robert Wolff
Blog
1 min read

Building on Arm - OpenEmbedded Edition

Wednesday, July 11, 2018

Building on Arm, for Arm: OpenEmbedded Edition With how fast Arm processors have gotten in the past few years, compiling the Linux Kernel natively on Arm is more than just...

Sahaj Sarup