SD Card installation instructions using Etcher
Step 1: Download the Ultra96 SD Card image, unzip/untar your download and be sure to recall the location of the file.
Step 3: Insert SD card into host machine (Minimum requirment of 16GB)
Step 4: Follow the Etcher prompt:
- Select the unzipped/untared image from your file directory
- Select drive to which you wish to write (i.e. you SD card)
- Click “Flash!” Button
- Wait for SD card to completely flash and follow prompt.
Step 5: Removed SD card from host machine and insert into Ultra96 board (on board SD card slot)