• Introduction
  • Hardware Setup
  • Software setup
  • Video Walk-through

Introduction

This guide will walk you through writing your setting up the FPGA Mezzanine and writing your first Blinky in Verilog.

Hardware Setup

• Any 96Boards CE Board
• Shiratech FPGA Mezzanine
• JTAG USB Blaster Programmer
  • Clones
  • Genuine
• Host machine running Linux or Windows

Note: Hikey 6620 will not fit the FPGA Mezzanine due to slight offset in the LS and HS headers

Software setup

• Quartus Lite

Video Walk-through